(PHP 5, PHP 7, PHP 8)
imagefilter — Applies a filter to an image
imagefilter() applies the given filter filter
on the image
.
image
A GdImage object, returned by one of the image creation functions, such as imagecreatetruecolor().
filter
filter
can be one of the following:
IMG_FILTER_NEGATE
: Reverses all colors of the image. IMG_FILTER_GRAYSCALE
: Converts the image into grayscale by changing the red, green and blue components to their weighted sum using the same coefficients as the REC.601 luma (Y') calculation. The alpha components are retained. For palette images the result may differ due to palette limitations. IMG_FILTER_BRIGHTNESS
: Changes the brightness of the image. Use args
to set the level of brightness. The range for the brightness is -255 to 255. IMG_FILTER_CONTRAST
: Changes the contrast of the image. Use args
to set the level of contrast. IMG_FILTER_COLORIZE
: Like IMG_FILTER_GRAYSCALE
, except you can specify the color. Use args
, arg2
and arg3
in the form of red
, green
, blue
and arg4
for the alpha
channel. The range for each color is 0 to 255. IMG_FILTER_EDGEDETECT
: Uses edge detection to highlight the edges in the image. IMG_FILTER_EMBOSS
: Embosses the image. IMG_FILTER_GAUSSIAN_BLUR
: Blurs the image using the Gaussian method. IMG_FILTER_SELECTIVE_BLUR
: Blurs the image. IMG_FILTER_MEAN_REMOVAL
: Uses mean removal to achieve a "sketchy" effect. IMG_FILTER_SMOOTH
: Makes the image smoother. Use args
to set the level of smoothness. IMG_FILTER_PIXELATE
: Applies pixelation effect to the image, use args
to set the block size and arg2
to set the pixelation effect mode. IMG_FILTER_SCATTER
: Applies scatter effect to the image, use args
and arg2
to define the effect strength and additionally arg3
to only apply the on select pixel colors. args
IMG_FILTER_BRIGHTNESS
: Brightness level. IMG_FILTER_CONTRAST
: Contrast level. IMG_FILTER_COLORIZE
: Value of red component. IMG_FILTER_SMOOTH
: Smoothness level. IMG_FILTER_PIXELATE
: Block size in pixels. IMG_FILTER_SCATTER
: Effect substraction level. This must not be higher or equal to the addition level set with arg2
. arg2
IMG_FILTER_COLORIZE
: Value of green component. IMG_FILTER_PIXELATE
: Whether to use advanced pixelation effect or not (defaults to false
). IMG_FILTER_SCATTER
: Effect addition level. arg3
IMG_FILTER_COLORIZE
: Value of blue component. IMG_FILTER_SCATTER
: Optional array indexed color values to apply effect at. arg4
IMG_FILTER_COLORIZE
: Alpha channel, A value between 0 and 127. 0 indicates completely opaque while 127 indicates completely transparent. Version | Description |
---|---|
8.0.0 | image expects a GdImage instance now; previously, a valid gd resource was expected. |
7.4.0 | Scatter support (IMG_FILTER_SCATTER ) was added. |
Example #1 imagefilter() grayscale example
<?php
$im = imagecreatefrompng('dave.png');
if($im && imagefilter($im, IMG_FILTER_GRAYSCALE))
{
echo 'Image converted to grayscale.';
imagepng($im, 'dave.png');
}
else
{
echo 'Conversion to grayscale failed.';
}
imagedestroy($im);
?>
Example #2 imagefilter() brightness example
<?php
$im = imagecreatefrompng('sean.png');
if($im && imagefilter($im, IMG_FILTER_BRIGHTNESS, 20))
{
echo 'Image brightness changed.';
imagepng($im, 'sean.png');
imagedestroy($im);
}
else
{
echo 'Image brightness change failed.';
}
?>
Example #3 imagefilter() colorize example
<?php
$im = imagecreatefrompng('philip.png');
if($im && imagefilter($im, IMG_FILTER_COLORIZE, 0, 255, 0))
{
echo 'Image successfully shaded green.';
imagepng($im, 'philip.png');
imagedestroy($im);
}
else
{
echo 'Green shading failed.';
}
?>
Example #4 imagefilter() negate example
<?php
// Define our negate function so its portable for
// php versions without imagefilter()
function negate($im)
{
if(function_exists('imagefilter'))
{
return imagefilter($im, IMG_FILTER_NEGATE);
}
for($x = 0; $x < imagesx($im); ++$x)
{
for($y = 0; $y < imagesy($im); ++$y)
{
$index = imagecolorat($im, $x, $y);
$rgb = imagecolorsforindex($index);
$color = imagecolorallocate($im, 255 - $rgb['red'], 255 - $rgb['green'], 255 - $rgb['blue']);
imagesetpixel($im, $x, $y, $color);
}
}
return(true);
}
$im = imagecreatefromjpeg('kalle.jpg');
if($im && negate($im))
{
echo 'Image successfully converted to negative colors.';
imagejpeg($im, 'kalle.jpg', 100);
imagedestroy($im);
}
else
{
echo 'Converting to negative colors failed.';
}
?>
Example #5 imagefilter() pixelate example
<?php
// Load the PHP logo, we need to create two instances
// to show the differences
$logo1 = imagecreatefrompng('./php.png');
$logo2 = imagecreatefrompng('./php.png');
// Create the image instance we want to show the
// differences on
$output = imagecreatetruecolor(imagesx($logo1) * 2, imagesy($logo1));
// Apply pixelation to each instance, with a block
// size of 3
imagefilter($logo1, IMG_FILTER_PIXELATE, 3);
imagefilter($logo2, IMG_FILTER_PIXELATE, 3, true);
// Merge the differences onto the output image
imagecopy($output, $logo1, 0, 0, 0, 0, imagesx($logo1) - 1, imagesy($logo1) - 1);
imagecopy($output, $logo2, imagesx($logo2), 0, 0, 0, imagesx($logo2) - 1, imagesy($logo2) - 1);
imagedestroy($logo1);
imagedestroy($logo2);
// Output the differences
header('Content-Type: image/png');
imagepng($output);
imagedestroy($output);
?>
The above example will output something similar to:
Example #6 imagefilter() scatter example
<?php
// Load the image
$logo = imagecreatefrompng('./php.png');
// Apply a very soft scatter effect to the image
imagefilter($logo, IMG_FILTER_SCATTER, 3, 5);
// Output the image with the scatter effect
header('Content-Type: image/png');
imagepng($logo);
imagedestroy($logo);
?>
The above example will output something similar to:
Note: The result of
IMG_FILTER_SCATTER
is always random.