Comparison Operators

Comparison operators, as their name implies, allow you to compare two values. You may also be interested in viewing the type comparison tables, as they show examples of various type related comparisons.

Comparison Operators
ExampleNameResult
$a == $bEqualtrue if $a is equal to $b after type juggling.
$a === $bIdenticaltrue if $a is equal to $b, and they are of the same type.
$a != $bNot equaltrue if $a is not equal to $b after type juggling.
$a <> $bNot equaltrue if $a is not equal to $b after type juggling.
$a !== $bNot identicaltrue if $a is not equal to $b, or they are not of the same type.
$a < $bLess thantrue if $a is strictly less than $b.
$a > $bGreater thantrue if $a is strictly greater than $b.
$a <= $bLess than or equal to true if $a is less than or equal to $b.
$a >= $bGreater than or equal to true if $a is greater than or equal to $b.
$a <=> $bSpaceship An int less than, equal to, or greater than zero when $a is less than, equal to, or greater than $b, respectively.

If both operands are numeric strings, or one operand is a number and the other one is a numeric string, then the comparison is done numerically. These rules also apply to the switch statement. The type conversion does not take place when the comparison is === or !== as this involves comparing the type as well as the value.

Warning

Prior to PHP 8.0.0, if a string is compared to a number or a numeric string then the string was converted to a number before performing the comparison. This can lead to surprising results as can be seen with the following example:

<?php
var_dump
(0 == "a");
var_dump("1" == "01");
var_dump("10" == "1e1");
var_dump(100 == "1e2");

switch (
"a") {
case
0:
echo
"0";
break;
case
"a":
echo
"a";
break;
}
?>

Output of the above example in PHP 7:

 bool(true) bool(true) bool(true) bool(true) 0 

Output of the above example in PHP 8:

 bool(false) bool(true) bool(true) bool(true) a 

<?php
// Integers
echo 1 <=> 1; // 0
echo 1 <=> 2; // -1
echo 2 <=> 1; // 1

// Floats
echo 1.5 <=> 1.5; // 0
echo 1.5 <=> 2.5; // -1
echo 2.5 <=> 1.5; // 1

// Strings
echo "a" <=> "a"; // 0
echo "a" <=> "b"; // -1
echo "b" <=> "a"; // 1

echo "a" <=> "aa"; // -1
echo "zz" <=> "aa"; // 1

// Arrays
echo [] <=> []; // 0
echo [1, 2, 3] <=> [1, 2, 3]; // 0
echo [1, 2, 3] <=> []; // 1
echo [1, 2, 3] <=> [1, 2, 1]; // 1
echo [1, 2, 3] <=> [1, 2, 4]; // -1

// Objects
$a = (object) ["a" => "b"];
$b = (object) ["a" => "b"];
echo
$a <=> $b; // 0

$a = (object) ["a" => "b"];
$b = (object) ["a" => "c"];
echo
$a <=> $b; // -1

$a = (object) ["a" => "c"];
$b = (object) ["a" => "b"];
echo
$a <=> $b; // 1

// not only values are compared; keys must match
$a = (object) ["a" => "b"];
$b = (object) ["b" => "b"];
echo
$a <=> $b; // 1

?>

For various types, comparison is done according to the following table (in order).

Comparison with Various Types
Type of Operand 1Type of Operand 2Result
null or stringstringConvert null to "", numerical or lexical comparison
bool or nullanythingConvert both sides to bool, false < true
objectobjectBuilt-in classes can define its own comparison, different classes are incomparable, same class see Object Comparison
string, resource, int or floatstring, resource, int or floatTranslate strings and resources to numbers, usual math
arrayarrayArray with fewer members is smaller, if key from operand 1 is not found in operand 2 then arrays are incomparable, otherwise - compare value by value (see following example)
objectanythingobject is always greater
arrayanythingarray is always greater

Example #1 Boolean/null comparison

<?php
// Bool and null are compared as bool always
var_dump(1 == TRUE); // TRUE - same as (bool)1 == TRUE
var_dump(0 == FALSE); // TRUE - same as (bool)0 == FALSE
var_dump(100 < TRUE); // FALSE - same as (bool)100 < TRUE
var_dump(-10 < FALSE);// FALSE - same as (bool)-10 < FALSE
var_dump(min(-100, -10, NULL, 10, 100)); // NULL - (bool)NULL < (bool)-100 is FALSE < TRUE
?>

Example #2 Transcription of standard array comparison

<?php
// Arrays are compared like this with standard comparison operators as well as the spaceship operator.
function standard_array_compare($op1, $op2)
{
if (
count($op1) < count($op2)) {
return -
1; // $op1 < $op2
} elseif (count($op1) > count($op2)) {
return
1; // $op1 > $op2
}
foreach (
$op1 as $key => $val) {
if (!
array_key_exists($key, $op2)) {
return
1;
} elseif (
$val < $op2[$key]) {
return -
1;
} elseif (
$val > $op2[$key]) {
return
1;
}
}
return
0; // $op1 == $op2
}
?>
Warning

Comparison of floating point numbers

Because of the way floats are represented internally, you should not test two floats for equality.

See the documentation for float for more information.

Note: Be aware that PHP's type juggling is not always obvious when comparing values of different types, particularly comparing ints to bools or ints to strings. It is therefore generally advisable to use === and !== comparisons rather than == and != in most cases.

Incomparable Values

While identity comparison (=== and !==) can be applied to arbitrary values, the other comparison operators should only be applied to comparable values. The result of comparing incomparable values is undefined, and should not be relied upon.

Ternary Operator

Another conditional operator is the "?:" (or ternary) operator.

Example #3 Assigning a default value

<?php
// Example usage for: Ternary Operator
$action = (empty($_POST['action'])) ? 'default' : $_POST['action'];

// The above is identical to this if/else statement
if (empty($_POST['action'])) {
$action = 'default';
} else {
$action = $_POST['action'];
}
?>
The expression (expr1) ? (expr2) : (expr3) evaluates to expr2 if expr1 evaluates to true, and expr3 if expr1 evaluates to false.

It is possible to leave out the middle part of the ternary operator. Expression expr1 ?: expr3 evaluates to the result of expr1 if expr1 evaluates to true, and expr3 otherwise. expr1 is only evaluated once in this case.

Note: Please note that the ternary operator is an expression, and that it doesn't evaluate to a variable, but to the result of an expression. This is important to know if you want to return a variable by reference. The statement return $var == 42 ? $a : $b; in a return-by-reference function will therefore not work and a warning is issued.

Note:

It is recommended to avoid "stacking" ternary expressions. PHP's behaviour when using more than one unparenthesized ternary operator within a single expression is non-obvious compared to other languages. Indeed prior to PHP 8.0.0, ternary expressions were evaluated left-associative, instead of right-associative like most other programming languages. Relying on left-associativity is deprecated as of PHP 7.4.0. As of PHP 8.0.0, the ternary operator is non-associative.

Example #4 Non-obvious Ternary Behaviour

<?php
// on first glance, the following appears to output 'true'
echo (true ? 'true' : false ? 't' : 'f');

// however, the actual output of the above is 't' prior to PHP 8.0.0
// this is because ternary expressions are left-associative

// the following is a more obvious version of the same code as above
echo ((true ? 'true' : false) ? 't' : 'f');

// here, one can see that the first expression is evaluated to 'true', which
// in turn evaluates to (bool)true, thus returning the true branch of the
// second ternary expression.
?>

Note:

Chaining of short-ternaries (?:), however, is stable and behaves reasonably. It will evaluate to the first argument that evaluates to a non-falsy value. Note that undefined values will still raise a warning.

Example #5 Short-ternary chaining

<?php
echo 0 ?: 1 ?: 2 ?: 3, PHP_EOL; //1
echo 0 ?: 0 ?: 2 ?: 3, PHP_EOL; //2
echo 0 ?: 0 ?: 0 ?: 3, PHP_EOL; //3
?>

Null Coalescing Operator

Another useful shorthand operator is the "??" (or null coalescing) operator.

Example #6 Assigning a default value

<?php
// Example usage for: Null Coalesce Operator
$action = $_POST['action'] ?? 'default';

// The above is identical to this if/else statement
if (isset($_POST['action'])) {
$action = $_POST['action'];
} else {
$action = 'default';
}
?>
The expression (expr1) ?? (expr2) evaluates to expr2 if expr1 is null, and expr1 otherwise.

In particular, this operator does not emit a notice or warning if the left-hand side value does not exist, just like isset(). This is especially useful on array keys.

Note: Please note that the null coalescing operator is an expression, and that it doesn't evaluate to a variable, but to the result of an expression. This is important to know if you want to return a variable by reference. The statement return $foo ?? $bar; in a return-by-reference function will therefore not work and a warning is issued.

Note:

The null coalescing operator has low precedence. That means if mixing it with other operators (such as string concatenation or arithmetic operators) parentheses will likely be required.

<?php
// Raises a warning that $name is undefined.
print 'Mr. ' . $name ?? 'Anonymous';

// Prints "Mr. Anonymous"
print 'Mr. ' . ($name ?? 'Anonymous');
?>

Note:

Please note that the null coalescing operator allows for simple nesting:

Example #7 Nesting null coalescing operator

<?php

$foo
= null;
$bar = null;
$baz = 1;
$qux = 2;

echo
$foo ?? $bar ?? $baz ?? $qux; // outputs 1

?>
To Top